JM44LC9SH13T — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC9SH13T: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-236-1951, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC9SH13T

NSN: 5340-01-236-1951
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter	0.812 INCHES NOMINAL IN
material_document_and_classification	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end	1.021 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.803 INCHES NOMINAL IN
NSN	5340-01-236-1951

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND

•

DIAMETER: 0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.021 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.803 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES BAND
DIAMETER	0.201 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.021 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.803 INCHES NOMINAL IN
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 BAND
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 3

TA11C44XC13TSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

C2874C13Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

S280SS13Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM44LC9SH13T?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC9SH13T?

JM44LC9SH13T is a CLAMP,LOOP.

What parts can replace JM44LC9SH13T?

There are 3 known substitutes for JM44LC9SH13T: TA11C44XC13T, C2874C13, S280SS13. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC9SH13T?

JM44LC9SH13T is cataloged in the U.S. Government catalog under NSN 5340-01-236-1951. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC9SH13T — CLAMP,LOOP

Request a Quote — JM44LC9SH13T