PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JM44LC9D29T
JM44LC9D29T ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-0691, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC9D29T
NSN: 5340-01-066-0691
FSC: 5340
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
loop_inside_diameter1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.533 INCHES MINIMUM AND 1.563 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole1.315 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
NSN5340-01-066-0691
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC9D29T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.315 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.315 INCHES MINIMUM AND 1.345 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.533 INCHES MINIMUM AND 1.563 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
47729Interchangeable
interchangeable cross-reference
interchangeable
D141-2Interchangeable
interchangeable cross-reference
interchangeable
SMD421514-8Interchangeable
interchangeable cross-reference
interchangeable
5340PL1825384Interchangeable
Same NIIN cross-reference
interchangeable
5340PL0847211Interchangeable
Same NIIN cross-reference
interchangeable
C2874D29Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JM44LC9D29T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC9D29T?
JM44LC9D29T is a CLAMP,LOOP.
What parts can replace JM44LC9D29T?
There are 6 known substitutes for JM44LC9D29T: 47729, D141-2, SMD421514-8 and 3 more. Substitute compatibility should be verified for your specific system.
Is JM44LC9D29T still available?
JM44LC9D29T is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC9D29T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026