PartsTable
Technical Data Sheet
Download PDF

JM44LC91DC24NB — JM44LC91DC24NB

✓ Government record, cited
J & M PRODUCTS, INC · ORING SEAL
PRODUCT OVERVIEW

JM44LC91DC24NB: JM44LC91DC24NB.

The JM44LC91DC24NB is a J & M PRODUCTS, INC industrial component. This part is cataloged in the U.S. Government catalog under NSN 5340-01-454-0481, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC91DC24NB
NSN: 5340-01-454-0481
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
Part NumberJM44LC91DC24NB
ManufacturerJ & M PRODUCTS, INC
NSN5340-01-454-0481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC91DC24NB MFR: J & M PRODUCTS, INC ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-85052/1 YELLOW MIL SPEC SINGLE MATERIAL RESPONSE THUMBSCREW
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.544 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-85052/1 YELLOW MIL SPEC SINGLE MATERIAL RESPONSE THUMBSCREW
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 COND T42 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.544 INCHES NOMINAL IN
SPECIAL FEATURESUPPER FOOT HAS LOCKING DEVICE TAB THAT SLIDE INTO SLOT OF LOWER FOOT
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.249 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
TA027043DC24NBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HS5773DC24NBReference document
Same NSN cross-reference
Reference document — Secondary reference
HS5773DC24DBReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy JM44LC91DC24NB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC91DC24NB?
JM44LC91DC24NB is a JM44LC91DC24NB manufactured by J & M PRODUCTS, INC.
What parts can replace JM44LC91DC24NB?
There are 3 known substitutes for JM44LC91DC24NB: TA027043DC24NB, HS5773DC24NB, HS5773DC24DB. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC91DC24NB?
JM44LC91DC24NB is cataloged in the U.S. Government catalog under NSN 5340-01-454-0481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC91DC24NB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.