JM44LC88H09PW — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC88H09PW: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: ORIGINAL DRAWING NAME-CLAMP ASSY, LOOP STYLE; ITEM IS W/O WEDGE (STRAIGHT CUSHION), style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-367-6294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC88H09PW

NSN: 5340-01-367-6294
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
material	RUBBER SILICONE CLASS Q CUSHION
overall_width	0.500 INCHES NOMINAL IN
special_features	ORIGINAL DRAWING NAME-CLAMP ASSY, LOOP STYLE; ITEM IS W/O WEDGE (STRAIGHT CUSHION)
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_diameter	0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
material_thickness	0.030 INCHES NOMINAL IN
loop_inside_diameter	0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
end_item_identification	C-17
distance_from_loop_center_to_tongue_end	0.663 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
NSN	5340-01-367-6294

COMPONENT DIAGRAM

KEY FEATURES

•

MATERIAL DIAMETER: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.663 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MATERIAL DIAMETER	0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.663 INCHES MINIMUM AND 0.693 INCHES MAXIMUM IN
SPECIAL FEATURES	ORIGINAL DRAWING NAME-CLAMP ASSY, LOOP STYLE; ITEM IS W/O WEDGE (STRAIGHT CUSHION)
END ITEM IDENTIFICATION	C-17
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.450 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

1455SS09BReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy JM44LC88H09PW?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC88H09PW?

JM44LC88H09PW is a CLAMP,LOOP.

What parts can replace JM44LC88H09PW?

There is 1 known substitute for JM44LC88H09PW: 1455SS09B. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC88H09PW?

JM44LC88H09PW is cataloged in the U.S. Government catalog under NSN 5340-01-367-6294. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC88H09PW — CLAMP,LOOP

Request a Quote — JM44LC88H09PW