PartsTable
Technical Data Sheet
Download PDF

JM44LC70WPH6YN — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC70WPH6YN: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER BUTADIENE NITRILE CUSHION, overall_width: 0.515 INCHES NOMINAL IN, special_features: CUSHION COLOR YELLOW, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-344-6821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC70WPH6YN
NSN: 5340-01-344-6821
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER BUTADIENE NITRILE CUSHION
overall_width0.515 INCHES NOMINAL IN
special_featuresCUSHION COLOR YELLOW
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
loop_inside_diameter0.375 INCHES NOMINAL IN
material_document_and_classificationMIL-C-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.887 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-344-6821
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC70WPH6YN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
•
DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.887 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.515 INCHES NOMINAL IN
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.887 INCHES NOMINAL IN
SPECIAL FEATURESCUSHION COLOR YELLOW
SURFACE TREATMENTPASSIVATE BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
1444PHW6YReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
9M972-6NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA025228-6NBReference document
Same NSN cross-reference
Reference document — Secondary reference
10113189Reference document
Same NSN cross-reference
Reference document — Informative reference only
S664NB6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy JM44LC70WPH6YN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC70WPH6YN?
JM44LC70WPH6YN is a CLAMP,LOOP.
What parts can replace JM44LC70WPH6YN?
There are 5 known substitutes for JM44LC70WPH6YN: 1444PHW6Y, 9M972-6N, TA025228-6NB and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC70WPH6YN?
JM44LC70WPH6YN is cataloged in the U.S. Government catalog under NSN 5340-01-344-6821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC70WPH6YN