PartsTable
Technical Data Sheet
Download PDF

JM44LC50WDC2FH — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC50WDC2FH: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: CUSHION COLOR PINK, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-206-7547, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC50WDC2FH
NSN: 5340-01-206-7547
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER SILICONE CLASS Q CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresCUSHION COLOR PINK
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
loop_inside_diameter0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cushioning_environmental_protectionOIL RESISTANT AND ABRASION RESISTANT
material_document_and_classificationQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.670 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.437 INCHES MINIMUM AND 0.467 INCHES MAXIMUM IN
NSN5340-01-206-7547
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC50WDC2FH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND ABRASION RESISTANT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND ABRASION RESISTANT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONASTMD2000 ASSN STD SINGLE MATERIAL RESPONSE OR TA612A6B3F3GK2M,FSCM 43999 MFR REF SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.670 INCHES NOMINAL IN
SPECIAL FEATURESCUSHION COLOR PINK
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
TA11C82WD02HBReference document
Same NSN cross-reference
Reference document — Secondary reference
LE127-0013-0202Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
JM44LC50WDC2FBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TA11C82DCW02HBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44LC50WDC2FH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC50WDC2FH?
JM44LC50WDC2FH is a CLAMP,LOOP.
What parts can replace JM44LC50WDC2FH?
There are 4 known substitutes for JM44LC50WDC2FH: TA11C82WD02HB, LE127-0013-0202, JM44LC50WDC2FB and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC50WDC2FH?
JM44LC50WDC2FH is cataloged in the U.S. Government catalog under NSN 5340-01-206-7547. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC50WDC2FH

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.