JM44LC50WDC24FH — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC50WDC24FH: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: SILICON CUSHION, overall_width: 0.670 INCHES NOMINAL IN, special_features: SILICONE RUBBER CUSHION WITH WEDGE, style_designator: OFFSET MOUNT, surface_treatment: CHROMATE OVERALL, material_thickness: 0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-718-3742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC50WDC24FH

NSN: 5340-01-718-3742
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

material	SILICON CUSHION
overall_width	0.670 INCHES NOMINAL IN
special_features	SILICONE RUBBER CUSHION WITH WEDGE
style_designator	OFFSET MOUNT
surface_treatment	CHROMATE OVERALL
material_thickness	0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
loop_inside_diameter	1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
end_item_identification	B-1 BOMBER
material_document_and_classification	QQ-A-250/5,CONDITION T4 OR T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.458 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	CLAMP,LOOP-TYPE,CUSHIONED,ALUMINUM STRAP
surface_treatment_document_and_classification	MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
NSN	5340-01-718-3742

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3065 TA612 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION

•

MATERIAL THICKNESS: 0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.458 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541,CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL A
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-3065 TA612 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,CONDITION T4 OR T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH	0.670 INCHES NOMINAL IN
MATERIAL THICKNESS	0.045 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.458 INCHES NOMINAL IN
SPECIAL FEATURES	SILICONE RUBBER CUSHION WITH WEDGE
SURFACE TREATMENT	CHROMATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP,LOOP-TYPE,CUSHIONED,ALUMINUM STRAP

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

LE127-0013-0224Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy JM44LC50WDC24FH?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC50WDC24FH?

JM44LC50WDC24FH is a CLAMP,LOOP.

What parts can replace JM44LC50WDC24FH?

There is 1 known substitute for JM44LC50WDC24FH: LE127-0013-0224. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC50WDC24FH?

JM44LC50WDC24FH is cataloged in the U.S. Government catalog under NSN 5340-01-718-3742. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC50WDC24FH — CLAMP,LOOP

Request a Quote — JM44LC50WDC24FH