PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD9 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD9: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_diameter: 0.032 INCHES NOMINAL IN, material_thickness: 0.032 INCHES NOMINAL IN, loop_inside_diameter: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-276-0184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD9
NSN: 5340-01-276-0184
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
materialRUBBER CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_diameter0.032 INCHES NOMINAL IN
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.562 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5,COND T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.247 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.952 INCHES MINIMUM AND 0.982 INCHES MAXIMUM IN
NSN5340-01-276-0184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.032 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.247 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.952 INCHES MINIMUM AND 0.982 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.032 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS3209 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,COND T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.247 INCHES MINIMUM AND 1.277 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.952 INCHES MINIMUM AND 0.982 INCHES MAXIMUM IN
MATERIALRUBBER CUSHION
MATERIALALUMINUM ALLOY 1230 AND ALUMINUM ALLOY 2024 BAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy JM44LC33WD9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD9?
JM44LC33WD9 is a CLAMP,LOOP.
What is the NSN for JM44LC33WD9?
JM44LC33WD9 is cataloged in the U.S. Government catalog under NSN 5340-01-276-0184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD9

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.