PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD8NL — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD8NL: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHIONING, mounting_pad: NOT INCLUDED, overall_width: 0.625 INCHES NOMINAL IN, overall_length: 2.708 INCHES NOMINAL IN, special_features: CUSHION COLOR YELLOW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-329-5192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD8NL
NSN: 5340-01-329-5192
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
cushionINCLUDED
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CUSHIONING
mounting_padNOT INCLUDED
overall_width0.625 INCHES NOMINAL IN
overall_length2.708 INCHES NOMINAL IN
special_featuresCUSHION COLOR YELLOW
style_designatorSADDLE ARCH
surface_treatmentPASSIVATE
material_thickness0.050 INCHES NOMINAL IN
mounting_hole_size0.215 INCHES NOMINAL IN
inside_diameter/arch_length1.250 INCHES NOMINAL IN
material_document_and_classificationMIL-G-21569,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
NSN5340-01-329-5192
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD8NL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.215 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.193 INCHES MINIMUM AND 2.223 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: SADDLE ARCH
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-21569,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.215 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.193 INCHES MINIMUM AND 2.223 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORSADDLE ARCH
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-21569,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHIONING
OVERALL LENGTH2.708 INCHES NOMINAL IN
OVERALL WIDTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.450 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
TA0910021H120Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44LC33WD8NL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD8NL?
JM44LC33WD8NL is a STRAP,RETAINING.
What parts can replace JM44LC33WD8NL?
There is 1 known substitute for JM44LC33WD8NL: TA0910021H120. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC33WD8NL?
JM44LC33WD8NL is cataloged in the U.S. Government catalog under NSN 5340-01-329-5192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD8NL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.