PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD7NL — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD7NL: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-348-4989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD7NL
NSN: 5340-01-348-4989
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.918 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
center_to_center_distance_between_loop_and_mounting_hole0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM IN
NSN5340-01-348-4989
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD7NL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.918 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE BAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.918 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 5
09A067WD07AFReference document
Same NSN cross-reference
Reference document — Secondary reference
815WD7AFReference document
Same NSN cross-reference
Reference document — Secondary reference
TA025035WDC07NBReference document
Same NSN cross-reference
Reference document — Secondary reference
TA025035WDC07NLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
815WD7NLSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy JM44LC33WD7NL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD7NL?
JM44LC33WD7NL is a CLAMP,LOOP.
What parts can replace JM44LC33WD7NL?
There are 5 known substitutes for JM44LC33WD7NL: 09A067WD07AF, 815WD7AF, TA025035WDC07NB and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC33WD7NL?
JM44LC33WD7NL is cataloged in the U.S. Government catalog under NSN 5340-01-348-4989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD7NL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.