PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD48 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD48: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, overall_width: 0.656 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, loop_inside_diameter: 3.000 INCHES NOMINAL IN, end_item_identification: PACER DAWN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-341-9634, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD48
NSN: 5340-01-341-9634
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
overall_width0.656 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
loop_inside_diameter3.000 INCHES NOMINAL IN
end_item_identificationPACER DAWN
distance_from_loop_center_to_tongue_end2.295 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.000 INCHES NOMINAL IN
NSN5340-01-341-9634
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD48 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.295 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.000 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
LOOP INSIDE DIAMETER: 3.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
OVERALL WIDTH0.656 INCHES NOMINAL IN
MATERIAL THICKNESS0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.295 INCHES NOMINAL IN
END ITEM IDENTIFICATIONPACER DAWN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.000 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY OVERALL
LOOP INSIDE DIAMETER3.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
5340-041WD48Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy JM44LC33WD48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD48?
JM44LC33WD48 is a CLAMP,LOOP.
What parts can replace JM44LC33WD48?
There is 1 known substitute for JM44LC33WD48: 5340-041WD48. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC33WD48?
JM44LC33WD48 is cataloged in the U.S. Government catalog under NSN 5340-01-341-9634. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD48

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.