JM44LC33WD29HW — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC33WD29HW: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-422-1817, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC33WD29HW

NSN: 5340-01-422-1817
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER SILICONE CLASS Q CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	CHROMATE BAND
material_thickness	0.064 INCHES NOMINAL IN
loop_inside_diameter	1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
material_document_and_classification	QQ-A-250/5 T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.701 INCHES NOMINAL IN
surface_treatment_document_and_classification	MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
center_to_center_distance_between_loop_and_mounting_hole	1.391 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
NSN	5340-01-422-1817

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 T42 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.701 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-C-8603 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.064 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.701 INCHES NOMINAL IN
SURFACE TREATMENT	CHROMATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

830WD29HWSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

TA025035WDC29HRSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM44LC33WD29HW?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC33WD29HW?

JM44LC33WD29HW is a CLAMP,LOOP.

What parts can replace JM44LC33WD29HW?

There are 2 known substitutes for JM44LC33WD29HW: 830WD29HW, TA025035WDC29HR. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC33WD29HW?

JM44LC33WD29HW is cataloged in the U.S. Government catalog under NSN 5340-01-422-1817. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC33WD29HW — CLAMP,LOOP

Request a Quote — JM44LC33WD29HW