JM44LC33WD23 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC33WD23: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: EQUIVALENT P/N MS21919WDC CLAMPS USABLE FOR SERVICE REPLACEMENT; TEMP RANGE -320 DEG 'F' TO +200 DEG 'F', style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-382-9914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC33WD23

NSN: 5340-01-382-9914
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER CUSHION
overall_width	0.500 INCHES NOMINAL IN
special_features	EQUIVALENT P/N MS21919WDC CLAMPS USABLE FOR SERVICE REPLACEMENT; TEMP RANGE -320 DEG 'F' TO +200 DEG 'F'
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
loop_inside_diameter	1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN
fastening_device_type	LOCK TAB
end_item_identification	PACER DAWN
material_document_and_classification	QQ-A-250/5D FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.513 INCHES NOMINAL IN
NSN	5340-01-382-9914

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENING DEVICE TYPE: LOCK TAB

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS3209C ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.513 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FASTENING DEVICE TYPE	LOCK TAB
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS3209C ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5D FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.513 INCHES NOMINAL IN
SPECIAL FEATURES	EQUIVALENT P/N MS21919WDC CLAMPS USABLE FOR SERVICE REPLACEMENT; TEMP RANGE -320 DEG 'F' TO +200 DEG 'F'
END ITEM IDENTIFICATION	PACER DAWN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

5340-041WD23Reference document

Same NSN cross-reference

Reference document — Secondary reference

830WD23GReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM44LC33WD23?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC33WD23?

JM44LC33WD23 is a CLAMP,LOOP.

What parts can replace JM44LC33WD23?

There are 2 known substitutes for JM44LC33WD23: 5340-041WD23, 830WD23G. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC33WD23?

JM44LC33WD23 is cataloged in the U.S. Government catalog under NSN 5340-01-382-9914. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC33WD23 — CLAMP,LOOP

Request a Quote — JM44LC33WD23