PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD22NL — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD22NL: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.2040 INCHES NOMINAL IN, material: RUBBER BUTADIENE NITRILE CUSHION, overall_width: 0.5000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-388-9080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD22NL
NSN: 5340-01-388-9080
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.2040 INCHES NOMINAL IN
materialRUBBER BUTADIENE NITRILE CUSHION
overall_width0.5000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE OVERALL
material_thickness0.0640 INCHES NOMINAL IN
loop_inside_diameter1.3600 INCHES MINIMUM AND 1.3900 INCHES MAXIMUM IN
cushioning_environmental_protectionFUEL RESISTANT AND FUEL, AROMATIC
material_document_and_classification-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end1.4820 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-388-9080
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD22NL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL RESISTANT AND FUEL, AROMATIC
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.2040 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0640 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL RESISTANT AND FUEL, AROMATIC
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION-85052/1 MIL SPEC SINGLE MATERIAL RESPONSE CUSHION
DIAMETER0.2040 INCHES NOMINAL IN
OVERALL WIDTH0.5000 INCHES NOMINAL IN
MATERIAL THICKNESS0.0640 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.4820 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
09A067WD22NBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy JM44LC33WD22NL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD22NL?
JM44LC33WD22NL is a CLAMP,LOOP.
What parts can replace JM44LC33WD22NL?
There is 1 known substitute for JM44LC33WD22NL: 09A067WD22NB. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC33WD22NL?
JM44LC33WD22NL is cataloged in the U.S. Government catalog under NSN 5340-01-388-9080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD22NL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.