PartsTable
Technical Data Sheet
Download PDF

JM44LC33WD20YN — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC33WD20YN: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-327-5962, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC33WD20YN
NSN: 5340-01-327-5962
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE BAND
material_thickness0.064 INCHES NOMINAL IN
loop_inside_diameter1.235 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.419 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
center_to_center_distance_between_loop_and_mounting_hole1.109 INCHES MINIMUM AND 1.139 INCHES MAXIMUM IN
NSN5340-01-327-5962
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC33WD20YN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.064 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.419 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE BAND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4,T42 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.064 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.419 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.109 INCHES MINIMUM AND 1.139 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
TA025035WDC20NBReference document
Same NSN cross-reference
Reference document — Secondary reference
09A067WD20NBSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
830WD20NLReference document
Same NSN cross-reference
Reference document — Secondary reference
09A067WD20AFReference document
Same NSN cross-reference
Reference document — Secondary reference
JM44LC33WD20NLReference document
Same NSN cross-reference
Reference document — Secondary reference
830WD20AFReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44LC33WD20YN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC33WD20YN?
JM44LC33WD20YN is a CLAMP,LOOP.
What parts can replace JM44LC33WD20YN?
There are 7 known substitutes for JM44LC33WD20YN: TA025035WDC20NB, 09A067WD20NB, 830WD20NL and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM44LC33WD20YN?
JM44LC33WD20YN is cataloged in the U.S. Government catalog under NSN 5340-01-327-5962. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC33WD20YN

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.