JM44LC33D4R — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC33D4R: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-493-8367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC33D4R

NSN: 5340-00-493-8367
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	RUBBER SILICONE CLASS Q CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
loop_inside_diameter	0.250 INCHES NOMINAL IN
cushioning_environmental_protection	HEAT
material_document_and_classification	QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.824 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.529 INCHES NOMINAL IN
NSN	5340-00-493-8367

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.824 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.030 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.824 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.529 INCHES NOMINAL IN
MATERIAL	RUBBER SILICONE CLASS Q CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 3

TA025035DC04HWReference document

Same NSN cross-reference

Reference document — Secondary reference

09A067D04RReference document

Same NSN cross-reference

Reference document — Secondary reference

23C100-4RSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM44LC33D4R?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC33D4R?

JM44LC33D4R is a CLAMP,LOOP.

What parts can replace JM44LC33D4R?

There are 3 known substitutes for JM44LC33D4R: TA025035DC04HW, 09A067D04R, 23C100-4R. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC33D4R?

JM44LC33D4R is cataloged in the U.S. Government catalog under NSN 5340-00-493-8367. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC33D4R — CLAMP,LOOP

Request a Quote — JM44LC33D4R