PartsTable
Technical Data Sheet
Download PDF

JM44LC28WD12GF — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JM44LC28WD12GF: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: RUBBER SILICONE CLASS Q CUSHION, overall_width: 0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-182-4216, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM44LC28WD12GF
NSN: 5340-01-182-4216
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialRUBBER SILICONE CLASS Q CUSHION
overall_width0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
cushioning_environmental_protectionFUEL RESISTANT AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT AND TEAR RESISTANT
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.595 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-182-4216
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM44LC28WD12GF MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
CUSHIONING ENVIRONMENTAL PROTECTION: FUEL RESISTANT AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT AND TEAR RESISTANT
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.595 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL RESISTANT AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT AND TEAR RESISTANT
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.595 INCHES MINIMUM AND 0.645 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JM44LC28WD12GF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM44LC28WD12GF?
JM44LC28WD12GF is a CLAMP,LOOP.
What is the NSN for JM44LC28WD12GF?
JM44LC28WD12GF is cataloged in the U.S. Government catalog under NSN 5340-01-182-4216. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM44LC28WD12GF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.