JM44LC23SS9AB — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC23SS9AB: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ASBESTOS CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, material_thickness: 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, loop_inside_diameter: 0.548 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-152-0087, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC23SS9AB

NSN: 5340-00-152-0087
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	ASBESTOS CUSHION
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
material_thickness	0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
loop_inside_diameter	0.548 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
specification/standard_data	80318-83930 MANUFACTURERS SPECIFICATION
cushioning_environmental_protection	HEAT
material_document_and_classification	AMS 3839 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	0.937 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.719 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN
NSN	5340-00-152-0087

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.937 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3839 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.030 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.937 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA	80318-83930 MANUFACTURERS SPECIFICATION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.719 INCHES MINIMUM AND 0.779 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 1

9M374-9Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy JM44LC23SS9AB?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC23SS9AB?

JM44LC23SS9AB is a CLAMP,LOOP.

What parts can replace JM44LC23SS9AB?

There is 1 known substitute for JM44LC23SS9AB: 9M374-9. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC23SS9AB?

JM44LC23SS9AB is cataloged in the U.S. Government catalog under NSN 5340-00-152-0087. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC23SS9AB — CLAMP,LOOP

Request a Quote — JM44LC23SS9AB