JM44LC13WS19R — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC13WS19R: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-685-4860, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC13WS19R

NSN: 5340-00-685-4860
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
overall_width	0.500 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	CADMIUM BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	1.188 INCHES NOMINAL IN
specification/standard_data	81205-BACC10GE MANUFACTURERS SPECIFICATION
cushioning_environmental_protection	HEAT
material_document_and_classification	D6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end	1.201 INCHES NOMINAL IN
NSN	5340-00-685-4860

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: D6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.201 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BAND
CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	D6-54312-1 FSCM 81205 MFR REF SINGLE MATERIAL RESPONSE CUSHION
DIAMETER	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.201 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA	81205-BACC10GE MANUFACTURERS SPECIFICATION
SURFACE TREATMENT	CADMIUM BAND

SUBSTITUTES & CROSS-REFERENCES 3

S369WH19Reference document

Same NSN cross-reference

Reference document — Secondary reference

BACC10GE19Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

400WCS19Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy JM44LC13WS19R?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC13WS19R?

JM44LC13WS19R is a CLAMP,LOOP.

What parts can replace JM44LC13WS19R?

There are 3 known substitutes for JM44LC13WS19R: S369WH19, BACC10GE19, 400WCS19. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC13WS19R?

JM44LC13WS19R is cataloged in the U.S. Government catalog under NSN 5340-00-685-4860. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC13WS19R — CLAMP,LOOP

Request a Quote — JM44LC13WS19R