JM44LC13WH16R — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM44LC13WH16R: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 321 OR STEEL COMP 347 BAND, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, special_features: REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-225-9669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM44LC13WH16R

NSN: 5340-01-225-9669
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 321 OR STEEL COMP 347 BAND
overall_width	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
special_features	REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	1.000 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	1.107 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.889 INCHES NOMINAL IN
NSN	5340-01-225-9669

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND

•

DIAMETER: 0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 1.107 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD 1ST MATERIAL RESPONSE OR AMS5512 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.194 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	1.107 INCHES NOMINAL IN
SPECIAL FEATURES	REINFORCED CORNER; TENSILE STRENGTH 100 KSI MIN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.889 INCHES NOMINAL IN
MATERIAL	STEEL COMP 321 OR STEEL COMP 347 BAND

SUBSTITUTES & CROSS-REFERENCES 4

S369WSSH16Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

509SS16Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

BACC10GE16CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

TA12C32WH16Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM44LC13WH16R?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM44LC13WH16R?

JM44LC13WH16R is a CLAMP,LOOP.

What parts can replace JM44LC13WH16R?

There are 4 known substitutes for JM44LC13WH16R: S369WSSH16, 509SS16, BACC10GE16C and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for JM44LC13WH16R?

JM44LC13WH16R is cataloged in the U.S. Government catalog under NSN 5340-01-225-9669. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM44LC13WH16R — CLAMP,LOOP

Request a Quote — JM44LC13WH16R