PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JM43LC6D3T
JM43LC6D3T ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: ANODIZE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-073-6735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM43LC6D3T
NSN: 5340-00-073-6735
FSC: 5340
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
surface_treatmentANODIZE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
cushioning_environmental_protectionHEAT
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
distance_from_loop_center_to_tongue_end0.611 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
NSN5340-00-073-6735
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM43LC6D3T MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.611 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
LOOP INSIDE DIAMETER: 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.611 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATOROFFSET MOUNT
LOOP INSIDE DIAMETER0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
SURFACE TREATMENTANODIZE BAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
4773Upgraded Successor
successor cross-reference
successor
5340PL1362324Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.2Interchangeable
interchangeable cross-reference
interchangeable
A-A-1931Interchangeable
interchangeable cross-reference
interchangeable
V-2G-BInterchangeable
interchangeable cross-reference
interchangeable
5340PL1691343Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JM43LC6D3T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM43LC6D3T?
JM43LC6D3T is a CLAMP,LOOP.
What parts can replace JM43LC6D3T?
There are 11 known substitutes for JM43LC6D3T: 4773, 5340PL1362324, ANSI A156.2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM43LC6D3T?
JM43LC6D3T is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-073-6735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM43LC6D3T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026