JM43LC6D2T — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM43LC6D2T: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.205 INCHES NOMINAL IN, material: PLASTIC POLYTETRAFLUOROETHYLENE CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-055-9991, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM43LC6D2T

NSN: 5340-01-055-9991
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.205 INCHES NOMINAL IN
material	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
overall_width	0.375 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	ANODIZE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.125 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	0.548 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.360 INCHES NOMINAL IN
NSN	5340-01-055-9991

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

DIAMETER: 0.205 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.548 INCHES NOMINAL IN

•

SURFACE TREATMENT: ANODIZE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.360 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
DIAMETER	0.205 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.548 INCHES NOMINAL IN
SURFACE TREATMENT	ANODIZE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.360 INCHES NOMINAL IN
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION
LOOP INSIDE DIAMETER	0.125 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

5340PL1731430Reference document

Same NSN cross-reference

Reference document — Informative reference only

5340PL0846599Reference document

Same NSN cross-reference

Reference document — Informative reference only

5340PL1691347Reference document

Same NSN cross-reference

Reference document — Informative reference only

C2874D2Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM43LC6D2T?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM43LC6D2T?

JM43LC6D2T is a CLAMP,LOOP.

What parts can replace JM43LC6D2T?

There are 4 known substitutes for JM43LC6D2T: 5340PL1731430, 5340PL0846599, 5340PL1691347 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for JM43LC6D2T?

JM43LC6D2T is cataloged in the U.S. Government catalog under NSN 5340-01-055-9991. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM43LC6D2T — CLAMP,LOOP

Request a Quote — JM43LC6D2T