JM43LC3SS7X — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM43LC3SS7X: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: STEEL COMP 302 OR STEEL COMP 321 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-007-4560, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM43LC3SS7X

NSN: 5340-01-007-4560
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	STEEL COMP 302 OR STEEL COMP 321 BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	PASSIVATE BAND
material_thickness	0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
loop_inside_diameter	0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
cushioning_environmental_protection	HEAT
material_document_and_classification	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.811 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.608 INCHES MINIMUM AND 0.638 INCHES MAXIMUM IN
NSN	5340-01-007-4560

COMPONENT DIAGRAM

KEY FEATURES

•

CUSHIONING ENVIRONMENTAL PROTECTION: HEAT

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.811 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CUSHIONING ENVIRONMENTAL PROTECTION	HEAT
STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.0285 INCHES MINIMUM AND 0.0355 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.811 INCHES NOMINAL IN
SURFACE TREATMENT	PASSIVATE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED

SUBSTITUTES & CROSS-REFERENCES 3

TA1718SS7XReference document

Same NSN cross-reference

Reference document — Secondary reference

211-501-9115Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

TA1718SS07XReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy JM43LC3SS7X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM43LC3SS7X?

JM43LC3SS7X is a CLAMP,LOOP.

What parts can replace JM43LC3SS7X?

There are 3 known substitutes for JM43LC3SS7X: TA1718SS7X, 211-501-9115, TA1718SS07X. Substitute compatibility should be verified for your specific system.

What is the NSN for JM43LC3SS7X?

JM43LC3SS7X is cataloged in the U.S. Government catalog under NSN 5340-01-007-4560. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM43LC3SS7X — CLAMP,LOOP

Request a Quote — JM43LC3SS7X