JM43LC14WD7X — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

JM43LC14WD7X: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-802-7791, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JM43LC14WD7X

NSN: 5340-00-802-7791
FSC: 5340 — Hardware, Commercial
CAGE: 22175 — J & M PRODUCTS, INC (USA)

SPECIFICATIONS

diameter	0.204 INCHES NOMINAL IN
material	ALUMINUM ALLOY 2024 BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	OFFSET MOUNT
tongue_hole_type	ROUND, UNTHREADED
surface_treatment	ANODIZE BAND
material_thickness	0.032 INCHES NOMINAL IN
loop_inside_diameter	0.438 INCHES NOMINAL IN
material_document_and_classification	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.799 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.611 INCHES NOMINAL IN
NSN	5340-00-802-7791

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: OFFSET MOUNT

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.204 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.799 INCHES NOMINAL IN

•

SURFACE TREATMENT: ANODIZE BAND

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	OFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.204 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.799 INCHES NOMINAL IN
SURFACE TREATMENT	ANODIZE BAND
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.611 INCHES NOMINAL IN
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE CUSHION

OTHER ITEMS IN FSC 5340 — Hardware, Commercial

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275

SUBSTITUTES & CROSS-REFERENCES 2

TA04C76WD07XSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

S281-7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JM43LC14WD7X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JM43LC14WD7X?

JM43LC14WD7X is a CLAMP,LOOP.

What parts can replace JM43LC14WD7X?

There are 2 known substitutes for JM43LC14WD7X: TA04C76WD07X, S281-7. Substitute compatibility should be verified for your specific system.

What is the NSN for JM43LC14WD7X?

JM43LC14WD7X is cataloged in the U.S. Government catalog under NSN 5340-00-802-7791. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JM43LC14WD7X — CLAMP,LOOP

Request a Quote — JM43LC14WD7X