PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JM43LC14WD5X
JM43LC14WD5X ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC TETRAFLUOROETHYLENE CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-536-6671, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM43LC14WD5X
NSN: 5340-00-536-6671
FSC: 5340
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC TETRAFLUOROETHYLENE CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
material_document_and_classificationQA-A-250/5TEMPER0ORT3ORT4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.737 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.549 INCHES NOMINAL IN
NSN5340-00-536-6671
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM43LC14WD5X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC TETRAFLUOROETHYLENE CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QA-A-250/5TEMPER0ORT3ORT4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.549 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC TETRAFLUOROETHYLENE CUSHION
MATERIAL DOCUMENT AND CLASSIFICATIONQA-A-250/5TEMPER0ORT3ORT4 FED SPEC SINGLE MATERIAL RESPONSE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.549 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.737 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
S2815Interchangeable
interchangeable cross-reference
interchangeable
D1AZ-6505-AInterchangeable
interchangeable cross-reference
interchangeable
3855Interchangeable
interchangeable cross-reference
interchangeable
8681887Interchangeable
interchangeable cross-reference
interchangeable
385Interchangeable
interchangeable cross-reference
interchangeable
F600E00245Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JM43LC14WD5X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM43LC14WD5X?
JM43LC14WD5X is a CLAMP,LOOP.
What parts can replace JM43LC14WD5X?
There are 16 known substitutes for JM43LC14WD5X: S2815, D1AZ-6505-A, 3855 and 13 more. Substitute compatibility should be verified for your specific system.
Is JM43LC14WD5X still available?
JM43LC14WD5X is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM43LC14WD5X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026