PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JM43LC14WD11X
JM43LC14WD11X ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.040 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-3982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JM43LC14WD11X
NSN: 5340-01-066-3982
FSC: 5340
CAGE: 22175 — J & M PRODUCTS, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.966 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.733 INCHES MINIMUM AND 0.763 INCHES MAXIMUM IN
NSN5340-01-066-3982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JM43LC14WD11X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.733 INCHES MINIMUM AND 0.763 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.966 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.733 INCHES MINIMUM AND 0.763 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.966 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.204 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
S2811-1Upgraded Successor
successor cross-reference
successor
6002-132Interchangeable
interchangeable cross-reference
interchangeable
38511Interchangeable
interchangeable cross-reference
interchangeable
3851Interchangeable
interchangeable cross-reference
interchangeable
C2037-11Interchangeable
Same NIIN cross-reference
interchangeable
TA04C76WD11XInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JM43LC14WD11X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JM43LC14WD11X?
JM43LC14WD11X is a CLAMP,LOOP.
What parts can replace JM43LC14WD11X?
There are 6 known substitutes for JM43LC14WD11X: S2811-1, 6002-132, 38511 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JM43LC14WD11X?
JM43LC14WD11X is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-066-3982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JM43LC14WD11X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026