PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JJS-A1-2
JJS-A1-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,CONCAVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, hole_diameter: 0.144 INCHES NOMINAL IN, outside_diameter: 0.281 INCHES NOMINAL IN, material_thickness: 0.125 INCHES NOMINAL IN, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-598-8070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JJS-A1-2
NSN: 5310-00-598-8070
FSC: 5310
CAGE: 0MTR9 — NORDEX, INCORPORATED DBA NORDEX INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
hole_diameter0.144 INCHES NOMINAL IN
outside_diameter0.281 INCHES NOMINAL IN
material_thickness0.125 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-598-8070
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: JJS-A1-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.144 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.144 INCHES NOMINAL IN
OUTSIDE DIAMETER0.281 INCHES NOMINAL IN
MATERIALSTEEL COMP 303 OVERALL
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
3-16-1Interchangeable
interchangeable cross-reference
interchangeable
A3-16RD TINNEDInterchangeable
interchangeable cross-reference
interchangeable
MS35446-1Interchangeable
interchangeable cross-reference
interchangeable
6715Interchangeable
interchangeable cross-reference
interchangeable
D9484-59-7Interchangeable
interchangeable cross-reference
interchangeable
44615K422Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JJS-A1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JJS-A1-2?
JJS-A1-2 is a WASHER,CONCAVE.
What parts can replace JJS-A1-2?
There are 25 known substitutes for JJS-A1-2: 3-16-1, A3-16RD TINNED, MS35446-1 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JJS-A1-2?
JJS-A1-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-598-8070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JJS-A1-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026