JHP39-813 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

JHP39-813: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include flat_height: 0.219 INCHES NOMINAL IN, shaft_style: ROUND, FLATTED, shaft_length: 0.469 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, shaft_diameter: 0.250 INCHES NOMINAL IN, mounting_method: STANDARD BUSHING. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-752-3264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ JHP39-813

NSN: 5905-00-752-3264
FSC: 5905 — Resistor
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)

SPECIFICATIONS

flat_height	0.219 INCHES NOMINAL IN
shaft_style	ROUND, FLATTED
shaft_length	0.469 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
section_quantity	1
first_flat_length	0.344 INCHES NOMINAL IN
nonturn_device_radius	0.500 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
screw_thread_diameter	0.375 INCHES NOMINAL IN
mounting_bushing_length	0.375 INCHES NOMINAL IN
NSN	5905-00-752-3264

COMPONENT DIAGRAM

KEY FEATURES

•

NONTURN DEVICE LOCATION: AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 2.500 KILOHMS SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

•

NONTURN DEVICE RADIUS: 0.500 INCHES NOMINAL IN

•

FIRST FLAT LENGTH: 0.344 INCHES NOMINAL IN

•

MOUNTING METHOD: STANDARD BUSHING

TECHNICAL CHARACTERISTICS

NONTURN DEVICE LOCATION	AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	2.500 KILOHMS SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
NONTURN DEVICE RADIUS	0.500 INCHES NOMINAL IN
FIRST FLAT LENGTH	0.344 INCHES NOMINAL IN
MOUNTING METHOD	STANDARD BUSHING
SHAFT STYLE	ROUND, FLATTED
ACTUATOR TYPE	SINGLE SHAFT

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 3

R25CAT120Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

120Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

R25-2500Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy JHP39-813?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JHP39-813?

JHP39-813 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace JHP39-813?

There are 3 known substitutes for JHP39-813: R25CAT120, 120, R25-2500. Substitute compatibility should be verified for your specific system.

What is the NSN for JHP39-813?

JHP39-813 is cataloged in the U.S. Government catalog under NSN 5905-00-752-3264. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JHP39-813 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — JHP39-813