PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JHP13-434
JHP13-434 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN, thread_length: 0.500 INCHES NOMINAL IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-0628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP13-434
NSN: 5305-00-012-0628
FSC: 5305
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
head_styleROUND
head_height0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch20
NSN5305-00-012-0628
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: JHP13-434 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: SLOT
•
NONDEFINITIVE SPEC/STD DATA: 1S STYLE AND I TYPE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD HEIGHT0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES NOMINAL IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
THREAD CLASS2A A
INTERNAL DRIVE STYLESLOT
NONDEFINITIVE SPEC/STD DATA1S STYLE AND I TYPE
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
3119141-01Interchangeable
interchangeable cross-reference
interchangeable
322PB3TWInterchangeable
interchangeable cross-reference
interchangeable
7716676P14Interchangeable
interchangeable cross-reference
interchangeable
3495Interchangeable
interchangeable cross-reference
interchangeable
H-51087Interchangeable
interchangeable cross-reference
interchangeable
2919Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JHP13-434?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP13-434?
JHP13-434 is a SCREW,MACHINE.
What parts can replace JHP13-434?
There are 21 known substitutes for JHP13-434: 3119141-01, 322PB3TW, 7716676P14 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JHP13-434?
JHP13-434 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-0628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP13-434

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026