PartsTable
Technical Data Sheet
Download PDF

JHP13-147 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JHP13-147: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.266 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.438 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 0.938 INCHES NOMINAL IN, bolt_circle_diameter: 1.812 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-351-6460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP13-147
NSN: 5330-00-351-6460
FSC: 5330 — Packing and Gasket Materials
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.266 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.438 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter0.938 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter1.812 INCHES NOMINAL IN
outside_corner_radius0.312 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.719 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-351-6460
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JHP13-147 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.719 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 0.938 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.719 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.438 INCHES NOMINAL IN
APERTURE DIAMETER0.938 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.812 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.312 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
LD165932ITEM7Reference document
Same NSN cross-reference
Reference document — Secondary reference
65647Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JHP13-147?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP13-147?
JHP13-147 is a GASKET.
What parts can replace JHP13-147?
There are 2 known substitutes for JHP13-147: LD165932ITEM7, 65647. Substitute compatibility should be verified for your specific system.
What is the NSN for JHP13-147?
JHP13-147 is cataloged in the U.S. Government catalog under NSN 5330-00-351-6460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP13-147