PartsTable
Technical Data Sheet
Download PDF

JHP124-379 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

JHP124-379: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, inside_diameter: 0.244 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN, coil_helix_direction: RIGHT-HAND OR LEFT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-364-3625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP124-379
NSN: 5360-00-364-3625
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
materialSTEEL UNS K08500 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity5
inside_diameter0.244 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
spring_free_length0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_deflection_rate34.000 POUNDS PER INCH NOMINAL LBS
spring_free_outside_diameter0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
material_document_and_classificationQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5360-00-364-3625
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SPRING,HELICAL,COMPRESSION TITLE COMPONENT PN JHP124-379 MFR SPRING,HELICAL,COMPRES
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
STYLE DESIGNATOR: CYLINDRICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SPRING FREE LENGTH: 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
•
SPRING DEFLECTION RATE: 34.000 POUNDS PER INCH NOMINAL LBS
•
INSIDE DIAMETER: 0.244 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
COIL QUANTITY: 5
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
STYLE DESIGNATORCYLINDRICAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SPRING FREE LENGTH0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
SPRING DEFLECTION RATE34.000 POUNDS PER INCH NOMINAL LBS
INSIDE DIAMETER0.244 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
COIL QUANTITY5
COIL HELIX DIRECTIONRIGHT-HAND OR LEFT-HAND
MATERIALSTEEL UNS K08500 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
1853342Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JHP124-379?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP124-379?
JHP124-379 is a SPRING,HELICAL,COMPRESSION.
What parts can replace JHP124-379?
There is 1 known substitute for JHP124-379: 1853342. Substitute compatibility should be verified for your specific system.
What is the NSN for JHP124-379?
JHP124-379 is cataloged in the U.S. Government catalog under NSN 5360-00-364-3625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP124-379