PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JHP111-15
JHP111-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303, style_designator: CLEVIS, pipe_accommodation_diameter: 1.000 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE, material_document_and_classification: AISI 303 ASSN STD SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-299-0638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP111-15
NSN: 5340-00-299-0638
FSC: 5340
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
materialSTEEL COMP 303
style_designatorCLEVIS
pipe_accommodation_diameter1.000 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
material_document_and_classificationAISI 303 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-299-0638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JHP111-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 303 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 303
•
STYLE DESIGNATOR: CLEVIS
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
•
PIPE ACCOMMODATION DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 303 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 303
STYLE DESIGNATORCLEVIS
SUPPORTED ITEM AND QUANTITY1 PIPE
PIPE ACCOMMODATION DIAMETER1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
S100489-00Interchangeable
interchangeable cross-reference
interchangeable
ANSI/NEMA PUB NO. CB1Interchangeable
interchangeable cross-reference
interchangeable
54600Interchangeable
interchangeable cross-reference
interchangeable
1075AInterchangeable
interchangeable cross-reference
interchangeable
FU10010Interchangeable
interchangeable cross-reference
interchangeable
19MS757Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JHP111-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP111-15?
JHP111-15 is a HANGER,PIPE.
What parts can replace JHP111-15?
There are 15 known substitutes for JHP111-15: S100489-00, ANSI/NEMA PUB NO. CB1, 54600 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JHP111-15?
JHP111-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-299-0638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP111-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026