PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JHP110-16
JHP110-16 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.625 INCHES NOMINAL IN, aperture_width: 5.250 INCHES NOMINAL IN, overall_length: 8.500 INCHES NOMINAL IN, aperture_length: 7.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-366-6251, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JHP110-16
NSN: 5330-00-366-6251
FSC: 5330
CAGE: 02032 — HOLLINGSWORTH JOHN R CO (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.625 INCHES NOMINAL IN
aperture_width5.250 INCHES NOMINAL IN
overall_length8.500 INCHES NOMINAL IN
aperture_length7.000 INCHES NOMINAL IN
inside_corner_radius0.750 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.375 INCHES NOMINAL IN
NSN5330-00-366-6251
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JHP110-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.938 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE LENGTH: 7.000 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.938 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3415-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE LENGTH7.000 INCHES NOMINAL IN
OVERALL WIDTH6.625 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.375 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
OVERALL LENGTH8.500 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
24036Interchangeable
interchangeable cross-reference
interchangeable
21824036-000-FInterchangeable
interchangeable cross-reference
interchangeable
22428-CInterchangeable
interchangeable cross-reference
interchangeable
036-24036-ZBInterchangeable
interchangeable cross-reference
interchangeable
4000-23145 ITEM 1Interchangeable
interchangeable cross-reference
interchangeable
4000-C3145Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JHP110-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JHP110-16?
JHP110-16 is a GASKET.
What parts can replace JHP110-16?
There are 17 known substitutes for JHP110-16: 24036, 21824036-000-F, 22428-C and 14 more. Substitute compatibility should be verified for your specific system.
Is JHP110-16 still available?
JHP110-16 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JHP110-16

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026