PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JH746-11
JH746-11 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN NO. 2, head_height: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, fastener_length: 0.500 INCHES NOMINAL IN, features_provided: CASEHARDENED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-5191, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JH746-11
NSN: 5305-00-014-5191
FSC: 5305
CAGE: 31435 — LUCAS AEROSPACE POWER EQUIPMENT CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN NO. 2
head_height0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
fastener_length0.500 INCHES NOMINAL IN
features_providedCASEHARDENED
surface_treatmentCADMIUM OR ZINC OVERALL
internal_drive_styleSLOT
nonmachine_thread_styleDOG TYPE (TYPE B OR C)
nondefinitive_spec/std_dataB TYPE AND 9S STYLE
nonmachine_nominal_thread_diameter0.138 INCHES IN
NSN5305-00-014-5191
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: JH746-11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: SLOT
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD HEIGHT: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 9S STYLE
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
HEAD DIAMETER: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLESLOT
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAB TYPE AND 9S STYLE
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
HEAD DIAMETER0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
HEAD STYLEPAN NO. 2
NONMACHINE THREAD STYLEDOG TYPE (TYPE B OR C)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
FFS107TYPEBSTYLE9SInterchangeable
interchangeable cross-reference
interchangeable
145181Interchangeable
interchangeable cross-reference
interchangeable
43800Interchangeable
interchangeable cross-reference
interchangeable
145183Interchangeable
interchangeable cross-reference
interchangeable
145193Interchangeable
interchangeable cross-reference
interchangeable
145205Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JH746-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JH746-11?
JH746-11 is a SCREW,TAPPING.
What parts can replace JH746-11?
There are 16 known substitutes for JH746-11: FFS107TYPEBSTYLE9S, 145181, 43800 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JH746-11?
JH746-11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-5191. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JH746-11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026