PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JH10-75
JH10-75 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3430 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN, overall_width: 0.2080 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: OUTER RING, BALL, overall_outside_diameter: 0.6296 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8498, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JH10-75
NSN: 3110-00-151-8498
FSC: 3110
CAGE: 86887 — SIGMA TEK, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3430 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN
overall_width0.2080 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorOUTER RING, BALL
overall_outside_diameter0.6296 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
NSN3110-00-151-8498
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JH10-75 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.6296 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: OUTER RING, BALL
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.3430 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.6296 INCHES MINIMUM AND 0.6299 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATOROUTER RING, BALL
MATERIALSTEEL OVERALL
OVERALL WIDTH0.2080 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM IN
BORE DIAMETER0.3430 INCHES MINIMUM AND 0.3450 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
0104Interchangeable
interchangeable cross-reference
interchangeable
1003590Interchangeable
interchangeable cross-reference
interchangeable
7661Interchangeable
interchangeable cross-reference
interchangeable
48638Interchangeable
interchangeable cross-reference
interchangeable
18324Interchangeable
interchangeable cross-reference
interchangeable
126830Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JH10-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JH10-75?
JH10-75 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace JH10-75?
There are 19 known substitutes for JH10-75: 0104, 1003590, 7661 and 16 more. Substitute compatibility should be verified for your specific system.
Is JH10-75 still available?
JH10-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JH10-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026