PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JG0064
JG0064 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, overall_height: 0.500 INCHES NOMINAL IN, groove_diameter: 0.250 INCHES NOMINAL IN, style_designator: DOUBLE FLANGE, top_flange_width: 0.187 INCHES NOMINAL IN, bottom_flange_width: 0.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-266-0762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JG0064
NSN: 5340-00-266-0762
FSC: 5340
CAGE: 3E191 — RAULAND-BORG CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
overall_height0.500 INCHES NOMINAL IN
groove_diameter0.250 INCHES NOMINAL IN
style_designatorDOUBLE FLANGE
top_flange_width0.187 INCHES NOMINAL IN
bottom_flange_width0.125 INCHES NOMINAL IN
bottom_flange_diameter0.343 INCHES NOMINAL IN
material_hardness_rating50.0 DUROMETER MINIMUM AND 60.0 DUROMETER MAXIMUM
outside/top_flange_diameter0.562 INCHES NOMINAL IN
NSN5340-00-266-0762
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JG0064 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOTTOM FLANGE DIAMETER: 0.343 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
GROOVE DIAMETER: 0.250 INCHES NOMINAL IN
•
TOP FLANGE WIDTH: 0.187 INCHES NOMINAL IN
•
BOTTOM FLANGE WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 50.0 DUROMETER MINIMUM AND 60.0 DUROMETER MAXIMUM
•
STYLE DESIGNATOR: DOUBLE FLANGE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.500 INCHES NOMINAL IN
BOTTOM FLANGE DIAMETER0.343 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
GROOVE DIAMETER0.250 INCHES NOMINAL IN
TOP FLANGE WIDTH0.187 INCHES NOMINAL IN
BOTTOM FLANGE WIDTH0.125 INCHES NOMINAL IN
MATERIAL HARDNESS RATING50.0 DUROMETER MINIMUM AND 60.0 DUROMETER MAXIMUM
STYLE DESIGNATORDOUBLE FLANGE
OUTSIDE/TOP FLANGE DIAMETER0.562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
2002Upgraded Successor
successor cross-reference
successor
F89G051Upgraded Successor
successor cross-reference
successor
89-7-19-25 MSPUpgraded Successor
successor cross-reference
successor
152055Upgraded Successor
successor cross-reference
successor
2053Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JG0064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JG0064?
JG0064 is a BUMPER.
What parts can replace JG0064?
There are 5 known substitutes for JG0064: 2002, F89G051, 89-7-19-25 MSP and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JG0064?
JG0064 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-266-0762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JG0064

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026