PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JD9046
JD9046 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.6875 INCHES NOMINAL IN, bore_diameter: 3.3750 INCHES NOMINAL IN, special_features: DUTY CLASS HM SERIES, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1870 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0655, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JD9046
NSN: 3110-00-277-0655
FSC: 3110
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.6875 INCHES NOMINAL IN
bore_diameter3.3750 INCHES NOMINAL IN
special_featuresDUTY CLASS HM SERIES
style_designatorNORMAL ANGLE
cone_corner_radius0.1870 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-277-0655
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JD9046 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.6875 INCHES NOMINAL IN
•
BORE DIAMETER: 3.3750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE CORNER RADIUS: 0.1870 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESDUTY CLASS HM SERIES
CONE WIDTH1.6875 INCHES NOMINAL IN
BORE DIAMETER3.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE CORNER RADIUS0.1870 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
54755-31PC238Interchangeable
interchangeable cross-reference
interchangeable
50025-29PC156Interchangeable
interchangeable cross-reference
interchangeable
49211Interchangeable
interchangeable cross-reference
interchangeable
225112Interchangeable
interchangeable cross-reference
interchangeable
60456Interchangeable
interchangeable cross-reference
interchangeable
L165Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JD9046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JD9046?
JD9046 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace JD9046?
There are 12 known substitutes for JD9046: 54755-31PC238, 50025-29PC156, 49211 and 9 more. Substitute compatibility should be verified for your specific system.
Is JD9046 still available?
JD9046 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JD9046

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026