PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JD9041
JD9041 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL AND IRON OVERALL, thickness: 0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, hole_diameter: 0.625 INCHES NOMINAL IN, overall_diameter: 1.312 INCHES NOMINAL IN, surface_treatment: CADMIUM OR ZINC OVERALL, fsc_application_data: GROUND CONTROL APPROACH RADAR SET GROUP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-938-5084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JD9041
NSN: 3110-00-938-5084
FSC: 3110
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL AND IRON OVERALL
thickness0.074 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
hole_diameter0.625 INCHES NOMINAL IN
overall_diameter1.312 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
fsc_application_dataGROUND CONTROL APPROACH RADAR SET GROUP
functional_descriptionHEADSITE CONTROL ASSY
peripheral_shape_styleROUND
type/model_designationCIU-1
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
reference_data_and_literatureTM 131-64 TABLE 7-2
NSN3110-00-938-5084
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JD9041 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
X1134Interchangeable
interchangeable cross-reference
interchangeable
MAK61Interchangeable
interchangeable cross-reference
interchangeable
131016Interchangeable
interchangeable cross-reference
interchangeable
104948Interchangeable
interchangeable cross-reference
interchangeable
D-104948Interchangeable
interchangeable cross-reference
interchangeable
183615Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JD9041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JD9041?
JD9041 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace JD9041?
There are 10 known substitutes for JD9041: X1134, MAK61, 131016 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JD9041?
JD9041 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-938-5084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JD9041

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026