PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JD8192
JD8192 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1875 INCHES NOMINAL IN, bore_diameter: 1.3745 INCHES MINIMUM AND 1.3755 INCHES MAXIMUM IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.1400 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-239-1366, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JD8192
NSN: 3110-01-239-1366
FSC: 3110
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1875 INCHES NOMINAL IN
bore_diameter1.3745 INCHES MINIMUM AND 1.3755 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
NSN3110-01-239-1366
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JD8192 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BORE DIAMETER: 1.3745 INCHES MINIMUM AND 1.3755 INCHES MAXIMUM IN
•
CONE WIDTH: 1.1875 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNORMAL ANGLE
BORE DIAMETER1.3745 INCHES MINIMUM AND 1.3755 INCHES MAXIMUM IN
CONE WIDTH1.1875 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
NR22Interchangeable
interchangeable cross-reference
interchangeable
29-150-20-0012XBLKInterchangeable
interchangeable cross-reference
interchangeable
30Interchangeable
interchangeable cross-reference
interchangeable
CS7268Interchangeable
interchangeable cross-reference
interchangeable
3872Interchangeable
interchangeable cross-reference
interchangeable
9137179Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy JD8192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JD8192?
JD8192 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace JD8192?
There are 11 known substitutes for JD8192: NR22, 29-150-20-0012XBLK, 30 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JD8192?
JD8192 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-239-1366. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JD8192

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026