PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JD10190

JD10190 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.0100 INCHES NOMINAL IN, bore_diameter: 1.4365 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.6256 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 4. This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-0739, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JD10190
NSN: 3110-00-100-0739
FSC: 3110
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.0100 INCHES NOMINAL IN
bore_diameter1.4365 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.6256 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 4
NSN3110-00-100-0739
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: JD10190 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
BORE DIAMETER: 1.4365 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.6256 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
CONE WIDTH1.0100 INCHES NOMINAL IN
BORE DIAMETER1.4365 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.6256 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AN3027-8InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A3169InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2780InterchangeableGOVERNMENT REGISTRY
IBM PCI-X Ultra4 RAID Controller
interchangeable
A909AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
53B6244InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4220PL0842499InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy JD10190?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JD10190?
JD10190 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace JD10190?
There are 23 known substitutes for JD10190: AN3027-8, A3169, 2780 and 20 more. Substitute compatibility should be verified for your specific system.
Is JD10190 still available?
JD10190 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JD10190

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026