PartsTable
Technical Data Sheet
Download PDF

JCM-15625-001 — PLUNGER,QUICK RELEASE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JCM-15625-001: PLUNGER,QUICK RELEASE.

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 1.000 INCHES NOMINAL IN, overall_length: 1.188 INCHES NOMINAL IN, end_pressure_rating: 4.000 POUNDS NOMINAL LBS, nominal_thread_size: 0.500 INCHES IN, thread_quantity_per_inch: 20. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-063-3783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JCM-15625-001
NSN: 5340-00-063-3783
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
shapeROUND
thread_length1.000 INCHES NOMINAL IN
overall_length1.188 INCHES NOMINAL IN
end_pressure_rating4.000 POUNDS NOMINAL LBS
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch20
thread_series_designatorUNF
NSN5340-00-063-3783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JCM-15625-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
SHAPE: ROUND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES DESIGNATOR: UNF
•
END PRESSURE RATING: 4.000 POUNDS NOMINAL LBS
TECHNICAL CHARACTERISTICS
THREAD LENGTH1.000 INCHES NOMINAL IN
SHAPEROUND
OVERALL LENGTH1.188 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.500 INCHES IN
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNF
END PRESSURE RATING4.000 POUNDS NOMINAL LBS
SUBSTITUTES & CROSS-REFERENCES 1
CL-40-SPS-2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JCM-15625-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JCM-15625-001?
JCM-15625-001 is a PLUNGER,QUICK RELEASE.
What parts can replace JCM-15625-001?
There is 1 known substitute for JCM-15625-001: CL-40-SPS-2. Substitute compatibility should be verified for your specific system.
What is the NSN for JCM-15625-001?
JCM-15625-001 is cataloged in the U.S. Government catalog under NSN 5340-00-063-3783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JCM-15625-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.