PartsTable
Technical Data Sheet
Download PDF

JCM-14332-001 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JCM-14332-001: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: ROUND, material: STEEL COMP 304, thickness: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN, aperture_shape: HEXAGON, aperture_length: 1.640 INCHES MINIMUM AND 1.655 INCHES MAXIMUM IN, outside_diameter: 9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-315-3639, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JCM-14332-001
NSN: 5340-01-315-3639
FSC: 5340 — Hardware, Commercial
CAGE: 58905 — STRIKE WEAPONS AND UNMANNED AVIATION (USA)
SPECIFICATIONS
shapeROUND
materialSTEEL COMP 304
thickness1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
aperture_shapeHEXAGON
aperture_length1.640 INCHES MINIMUM AND 1.655 INCHES MAXIMUM IN
outside_diameter9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN
special_features2.500 IN. DIA BY 0.500 IN. IN AND 0.560 IN. MAX HT FLANGE; MOUNTING CONFIGURATION: LOCATED ON 7.375 IN. BOLT CIRCLE DIA IN
features_providedRAISED SURFACE AND APERTURE
surface_treatmentPASSIVATE
mounting_hole_typeUNTHREADED
raised_surface_height0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
mounting_hole_diameter0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM ALL HOLES IN
NSN5340-01-315-3639
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JCM-14332-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 8
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35, TY 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-35, TY 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-35, TY 3 FED SPEC 1ST TREATMENT RESPONSE
•
RAISED SURFACE HEIGHT: 0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
RAISED SURFACE DIAMETER: 5.990 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A240, CL 304, COND A ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM ALL HOLES IN
•
SHAPE: ROUND
•
OUTSIDE DIAMETER: 9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY8
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35, TY 1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-35, TY 2 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-35, TY 3 FED SPEC 1ST TREATMENT RESPONSE
RAISED SURFACE HEIGHT0.190 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
RAISED SURFACE DIAMETER5.990 INCHES MINIMUM AND 6.000 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A240, CL 304, COND A ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM ALL HOLES IN
SHAPEROUND
OUTSIDE DIAMETER9.000 INCHES NOMINAL9.000 INCHES NOMINAL IN
FEATURES PROVIDEDRAISED SURFACE AND APERTURE
APERTURE LENGTH1.640 INCHES MINIMUM AND 1.655 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
91769Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy JCM-14332-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JCM-14332-001?
JCM-14332-001 is a PLATE,MOUNTING.
What parts can replace JCM-14332-001?
There is 1 known substitute for JCM-14332-001: 91769. Substitute compatibility should be verified for your specific system.
What is the NSN for JCM-14332-001?
JCM-14332-001 is cataloged in the U.S. Government catalog under NSN 5340-01-315-3639. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JCM-14332-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.