PartsTable
Technical Data Sheet
Download PDF

JCM-10484-001 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JCM-10484-001: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL COMP 304 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.120 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-207-9819, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JCM-10484-001
NSN: 5340-01-207-9819
FSC: 5340 — Hardware, Commercial
CAGE: 58905 — STRIKE WEAPONS AND UNMANNED AVIATION (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL COMP 304 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.120 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
style_designatorU
surface_treatmentCADMIUM AND CHROMATE
material_thickness0.090 INCHES NOMINAL IN
mounting_hole_size0.257 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
inside_diameter/arch_length1.510 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.620 INCHES NOMINAL IN
NSN5340-01-207-9819
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JCM-10484-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.257 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: U
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
•
SURFACE TREATMENT: CADMIUM AND CHROMATE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.257 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORU
OVERALL LENGTH1.000 INCHES NOMINAL IN
OVERALL WIDTH1.120 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
SURFACE TREATMENTCADMIUM AND CHROMATE
MATERIALSTEEL COMP 304 LOCATION NOT OTHERWISE SPECIFIED
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE0.620 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy JCM-10484-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JCM-10484-001?
JCM-10484-001 is a STRAP,RETAINING.
What is the NSN for JCM-10484-001?
JCM-10484-001 is cataloged in the U.S. Government catalog under NSN 5340-01-207-9819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JCM-10484-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.