PartsTable
Technical Data Sheet
Download PDF

JCM-10260-001 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

JCM-10260-001: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, first_end_style: CHAMFERED, second_end_style: COUNTERBORED W/O THRU HOLE, special_features: 0.500-13 UNC-2B BY 0.560 MIN THD 0.620 IN. DIA BY 100.0 DEG CSK ON CHAMFERED END IN, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 5.080 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-206-7573, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JCM-10260-001
NSN: 5315-01-206-7573
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 58905 — STRIKE WEAPONS AND UNMANNED AVIATION (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
first_end_styleCHAMFERED
second_end_styleCOUNTERBORED W/O THRU HOLE
special_features0.500-13 UNC-2B BY 0.560 MIN THD 0.620 IN. DIA BY 100.0 DEG CSK ON CHAMFERED END IN
surface_treatmentPASSIVATE OVERALL
pin_overall_length5.080 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
pin_overall_diameter2.2470 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
first_end_taper_angle15.0 DEGREES NOMINAL
second_end_counterbore_depth0.960 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
second_end_counterbore_diameter1.624 INCHES MINIMUM AND 1.637 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-206-7573
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: JCM-10260-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 2.2470 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 5.080 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND END COUNTERBORE DIAMETER: 1.624 INCHES MINIMUM AND 1.637 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
PIN OVERALL DIAMETER2.2470 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
PIN OVERALL LENGTH5.080 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END COUNTERBORE DIAMETER1.624 INCHES MINIMUM AND 1.637 INCHES MAXIMUM IN
SPECIAL FEATURES0.500-13 UNC-2B BY 0.560 MIN THD 0.620 IN. DIA BY 100.0 DEG CSK ON CHAMFERED END IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy JCM-10260-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JCM-10260-001?
JCM-10260-001 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for JCM-10260-001?
JCM-10260-001 is cataloged in the U.S. Government catalog under NSN 5315-01-206-7573. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JCM-10260-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.