PartsTable
Technical Data Sheet
Download PDF

JC2296 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

JC2296: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, rim_surface_width: 0.083 INCHES NOMINAL IN, peripheral_diameter: 1.500 INCHES NOMINAL IN, center_hole_diameter: 1.000 INCHES NOMINAL IN, cross-sectional_height: 0.165 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-367-7201, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JC2296
NSN: 5330-00-367-7201
NIINs: 003677201, 012759424
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
rim_surface_width0.083 INCHES NOMINAL IN
peripheral_diameter1.500 INCHES NOMINAL IN
center_hole_diameter1.000 INCHES NOMINAL IN
cross-sectional_height0.165 INCHES NOMINAL IN
cross-sectional_shape_styleV
NSN5330-00-367-7201
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: JC2296 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.165 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
RIM SURFACE WIDTH: 0.083 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V
•
PERIPHERAL DIAMETER: 1.500 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.165 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
RIM SURFACE WIDTH0.083 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV
PERIPHERAL DIAMETER1.500 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy JC2296?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JC2296?
JC2296 is a O-RING.
What is the NSN for JC2296?
JC2296 is cataloged in the U.S. Government catalog under NSN 5330-00-367-7201. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JC2296

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.