PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JANTX1N4150
JANTX1N4150 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, overall_length: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-479-8155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JANTX1N4150
NSN: 5961-00-479-8155
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialGLASS ENCLOSURE
overall_length0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
overall_diameter0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-PRF-19500/231 GOVERNMENT SPECIFICATION
current_rating_per_characteristic4.00 AMPERES MAXIMUM PEAK FORWARD SURGE CURRENT AND 200.00 MILLIAMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
voltage_rating_in_volts_per_characteristic75.0 MINIMUM BREAKDOWN VOLTAGE, DC AND 50.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE
maximum_operating_temp_per_measurement_point175.0 CELSIUS JUNCTION DEGC
NSN5961-00-479-8155
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN JANTX1N4150 MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81349-MIL-PRF-19500/231 GOVERNMENT SPECIFICATION
•
OVERALL DIAMETER: 0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
MOUNTING METHOD: TERMINAL
•
MATERIAL: SILICON SEMICONDUCTOR
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 175.0 CELSIUS JUNCTION DEGC
•
TEST DATA DOCUMENT: 81349-MIL-PRF-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 75.0 MINIMUM BREAKDOWN VOLTAGE, DC AND 50.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA81349-MIL-PRF-19500/231 GOVERNMENT SPECIFICATION
OVERALL DIAMETER0.056 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
OVERALL LENGTH0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
MOUNTING METHODTERMINAL
MATERIALSILICON SEMICONDUCTOR
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT175.0 CELSIUS JUNCTION DEGC
TEST DATA DOCUMENT81349-MIL-PRF-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC75.0 MINIMUM BREAKDOWN VOLTAGE, DC AND 50.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE
FEATURES PROVIDEDHERMETICALLY SEALED CASE
TERMINAL LENGTH1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
000-8002-764Interchangeable
interchangeable cross-reference
interchangeable
S600 1005AInterchangeable
interchangeable cross-reference
interchangeable
1N4150Interchangeable
interchangeable cross-reference
interchangeable
999/4/43076/105Interchangeable
interchangeable cross-reference
interchangeable
99094002Interchangeable
interchangeable cross-reference
interchangeable
479-1148-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy JANTX1N4150?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JANTX1N4150?
JANTX1N4150 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace JANTX1N4150?
There are 32 known substitutes for JANTX1N4150: 000-8002-764, S600 1005A, 1N4150 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JANTX1N4150?
JANTX1N4150 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-479-8155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JANTX1N4150

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026