The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, overall_length: 0.140 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 0.600 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, overall_diameter: 0.060 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN, terminal_type_and_quantity: 2 UNINSULATED WIRE LEAD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-181-0661, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| material | GLASS ENCLOSURE |
| overall_length | 0.140 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN |
| mounting_method | TERMINAL |
| terminal_length | 0.600 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| overall_diameter | 0.060 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| terminal_type_and_quantity | 2 UNINSULATED WIRE LEAD |
| current_rating_per_characteristic | 1.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE AND 30.00 AMPERES MAXIMUM PEAK FORWARD SURGE CURRENT |
| voltage_rating_in_volts_per_characteristic | 1000.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE |
| maximum_operating_temp_per_measurement_point | 175.0 CELSIUS JUNCTION DEGC |
| NSN | 5961-00-181-0661 |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 1000.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE |
| MATERIAL | GLASS ENCLOSURE |
| OVERALL LENGTH | 0.140 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 175.0 CELSIUS JUNCTION DEGC |
| MOUNTING METHOD | TERMINAL |
| CURRENT RATING PER CHARACTERISTIC | 1.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE AND 30.00 AMPERES MAXIMUM PEAK FORWARD SURGE CURRENT |
| TERMINAL LENGTH | 0.600 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| OVERALL DIAMETER | 0.060 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN |
| TEST DATA DOCUMENT | 81349-MIL-PRF-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MATERIAL | SILICON SEMICONDUCTOR |