PartsTable
Technical Data Sheet
PartsTable / COMPONENT / JAN2N3028
JAN2N3028 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,THYRISTOR is a the manufacturer industrial component. Key specifications include overall_length: 0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, mounting_method: TERMINAL, terminal_length: 0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, overall_diameter: 0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN, special_features: JUNCTION PATTERN ARRANGEMENT: PNPN, features_provided: BURN IN AND HERMETICALLY SEALED CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-01-017-9739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
JAN2N3028
NSN: 5961-01-017-9739
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
overall_length0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
mounting_methodTERMINAL
terminal_length0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
overall_diameter0.209 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
special_featuresJUNCTION PATTERN ARRANGEMENT: PNPN
features_providedBURN IN AND HERMETICALLY SEALED CASE
internal_configurationJUNCTION CONTACT
semiconductor_materialSILICON
terminal_circle_diameter0.100 INCHES NOMINAL IN
terminal_type_and_quantity3 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-S-19500/419 GOVERNMENT SPECIFICATION
current_rating_per_characteristic8.00 AMPERES MAXIMUM FORWARD CURRENT, REPETITIVE, MAXIMUM PEAK TOTAL VALUE AND 175.00 MILLIAMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
NSN5961-01-017-9739
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN JAN2N3028 MFR OEM SEMICONDUCTOR DEVICE,THYRISTOR
KEY FEATURES
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 5.0 MAXIMUM KNEE VOLTAGE AND 60.0 MAXIMUM ON VOLTAGE, FORWARD VOLTAGE DROP, DC
•
SPECIFICATION/STANDARD DATA: 81349-MIL-S-19500/419 GOVERNMENT SPECIFICATION
•
ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE: ANODE
•
TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION: TO-18
•
INTERNAL CONFIGURATION: JUNCTION CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC5.0 MAXIMUM KNEE VOLTAGE AND 60.0 MAXIMUM ON VOLTAGE, FORWARD VOLTAGE DROP, DC
SPECIFICATION/STANDARD DATA81349-MIL-S-19500/419 GOVERNMENT SPECIFICATION
SPECIAL FEATURESJUNCTION PATTERN ARRANGEMENT: PNPN
ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASEANODE
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATIONTO-18
OVERALL LENGTH0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
INTERNAL CONFIGURATIONJUNCTION CONTACT
MOUNTING METHODTERMINAL
TERMINAL LENGTH0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
MIL-S-19500/419Interchangeable
interchangeable cross-reference
interchangeable
JAN2N3032Interchangeable
interchangeable cross-reference
interchangeable
3229486-27Interchangeable
interchangeable cross-reference
interchangeable
G327591-1Interchangeable
interchangeable cross-reference
interchangeable
JANTX2N3029Interchangeable
interchangeable cross-reference
interchangeable
JANTX2N3032Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy JAN2N3028?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JAN2N3028?
JAN2N3028 is a SEMICONDUCTOR DEVICE,THYRISTOR.
What parts can replace JAN2N3028?
There are 18 known substitutes for JAN2N3028: MIL-S-19500/419, JAN2N3032, 3229486-27 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JAN2N3028?
JAN2N3028 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-01-017-9739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JAN2N3028

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026