JA22TA-1Y — ROLLER,LINEAR-ROTARY MOTION

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

JA22TA-1Y: ROLLER,LINEAR-ROTARY MOTION.

The ROLLER,LINEAR-ROTARY MOTION is a the manufacturer industrial component. Key specifications include material: STEEL, face_width: 0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN, outside_diameter: 1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN, style_designator: PLAIN, bore_inside_diameter: 0.688 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN, casehardening_indicator: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-413-4710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

JA22TA-1Y

NSN: 3120-00-413-4710
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)

SPECIFICATIONS

material	STEEL
face_width	0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
outside_diameter	1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
special_features	0D TAPER AT BOTH ENDS 1.182 IN. MAX,1.178 IN. MIN AT GAGE POINT 0.100 IN. FROM ENDS,ID HAS POLYTETRAFLUOROETHYLENE LINER IN
style_designator	PLAIN
bore_inside_diameter	0.688 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN
casehardening_indicator	NOT CASEHARDENED
metallic_hardness_rating	55.0 MINIMUM ROCKWELL C AND 59.0 MAXIMUM ROCKWELL C
NSN	3120-00-413-4710

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: PLAIN

•

OUTSIDE DIAMETER: 1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN

•

CASEHARDENING INDICATOR: NOT CASEHARDENED

•

MATERIAL: STEEL

•

FACE WIDTH: 0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN

•

METALLIC HARDNESS RATING: 55.0 MINIMUM ROCKWELL C AND 59.0 MAXIMUM ROCKWELL C

•

BORE INSIDE DIAMETER: 0.688 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	PLAIN
OUTSIDE DIAMETER	1.185 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
CASEHARDENING INDICATOR	NOT CASEHARDENED
SPECIAL FEATURES	0D TAPER AT BOTH ENDS 1.182 IN. MAX,1.178 IN. MIN AT GAGE POINT 0.100 IN. FROM ENDS,ID HAS POLYTETRAFLUOROETHYLENE LINER IN
MATERIAL	STEEL
FACE WIDTH	0.945 INCHES MINIMUM AND 0.955 INCHES MAXIMUM IN
METALLIC HARDNESS RATING	55.0 MINIMUM ROCKWELL C AND 59.0 MAXIMUM ROCKWELL C
BORE INSIDE DIAMETER	0.688 INCHES MINIMUM AND 0.689 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

JA22TA1Reference document

Same NSN cross-reference

Reference document — Secondary reference

A02RS288-4Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

90991Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy JA22TA-1Y?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is JA22TA-1Y?

JA22TA-1Y is a ROLLER,LINEAR-ROTARY MOTION.

What parts can replace JA22TA-1Y?

There are 3 known substitutes for JA22TA-1Y: JA22TA1, A02RS288-4, 90991. Substitute compatibility should be verified for your specific system.

What is the NSN for JA22TA-1Y?

JA22TA-1Y is cataloged in the U.S. Government catalog under NSN 3120-00-413-4710. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

JA22TA-1Y — ROLLER,LINEAR-ROTARY MOTION

Request a Quote — JA22TA-1Y