PartsTable
Technical Data Sheet
Download PDF

JA1L040S201UC — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

JA1L040S201UC: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.625 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.625 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.156 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-107-3917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ JA1L040S201UC
NSN: 5905-00-107-3917
NIINs: 001073917, 008583455
FSC: 5905 — Resistor
CAGE: 01121 — ROCKWELL AUTOMATION, INC. DBA ROCKWELL AUTOMATION (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.625 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.625 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.156 INCHES MAXIMUM IN
overall_length1.250 INCHES NOMINAL IN
shaft_diameter0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
mounting_methodLOCKING BUSHING
fragility_factorMODERATELY RUGGED
overall_diameter1.484 INCHES MAXIMUM IN
section_quantity1
NSN5905-00-107-3917
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN JA1L040S201UC MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 1.156 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
ELECTRICAL RESISTANCE PER SECTION: 200.0 OHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 120.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SHAFT BEARING TYPE: SLEEVE
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BODY DIAMETER1.156 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
ELECTRICAL RESISTANCE PER SECTION200.0 OHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
SECTION QUANTITY1
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SHAFT BEARING TYPESLEEVE
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
FRAGILITY FACTORMODERATELY RUGGED
BODY STYLECYLINDRICAL BUSHING MOUNTED
SUBSTITUTES & CROSS-REFERENCES 6
318K108-201KSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BA-10034-308Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20245-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
353-5298Reference document
Same NSN cross-reference
Reference document — Secondary reference
318K108Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
318K134Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy JA1L040S201UC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is JA1L040S201UC?
JA1L040S201UC is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace JA1L040S201UC?
There are 6 known substitutes for JA1L040S201UC: 318K108-201K, BA-10034-308, 20245-13 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for JA1L040S201UC?
JA1L040S201UC is cataloged in the U.S. Government catalog under NSN 5905-00-107-3917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — JA1L040S201UC